CSE 231
Piazza

Part 3

Due Date Mar 17 11:59:59 PM

Recent Updates

In this part you need to reuse and extend the dataflow analysis framework to implement a liveness analysis and a may-point-to analysis.

Getting Started

Download the updated solution opt here (Last updated: Mar 21, 2017, 4:24 PM PDT).

Liveness Analysis

Your first task for this part is to implement a liveness analysis based on the framework implemented in the previous assignment. Recall that a variable is live at a particular point in the program if its value at that point will be used in the future. It is dead otherwise.

Control Flow Graph (CFG)

Like in part 2, LLVM builds a CFG for a given function, which we call LLVM CFG. Unlike reaching definitions, liveness is a backwards analysis. This means that we need to propagate facts backwards from OUT to IN. The function void initializeBackwardMap(Function * func) in 231DFA.h builds a CFG of the given function func for backwards analyses. Let us call it BDFA CFG. Analyses based on 231DFA.h should work on DFA CFGs or BDFA CFGs. The choice between the two is determined by the Direction parameter of the DataFlowAnalysis class. Below are some of the main points of constructing BDFA CFGs:

First, the edges of a BDFA CFG are reversed with respect to the original LLVM CFG (or the respective DFA CFG for that matter).

Also, instructions may have multiple incoming and outgoing edges, so the first step of any flow function should be joining the incoming data flows.
Second, phi instructions are handled similarly to part 2: the phi instruction is an IR instruction and any IR instruction can return at most one value. If multiple values need to be synthesized there will be a number of phi instructions at the beginning of a basic block. I.e. in the LLVM CFG, an IR basic block may start with a number of consecutive phi instructions. In the BDFA CFG, the first non-phi instruction connects to the first phi in the same basic block directly, bypassing all the other phi instructions. Below is an example that illustrates these two kinds of CFG for the same code:

There are k phi instructions at the start of the basic block C. In the LLVM CFG, these phi instructions are connected sequentially. In the BDFA CFG, the first non-phi instruction %res = add %a, %b has an outgoing edge connecting to phi 1 directly. When encountering a phi instruction, the flow function should process the series of phi instructions together (effectively a PHI node from the lecture) rather than process each phi instruction individually. This means that the flow function needs to look at the LLVM CFG to iterate through all the later phi instructions at the beginning of the same basic block until the first non-phi instruction.

Lattice

Just like part 2, this analysis operates on the LLVM IR, so we only care about LLVM IR variables that are live at each program point. Note that LLVM IR is in Single Static Assignment (SSA) form, so every LLVM IR variable has exactly one definition. LLVM IR instructions that define variables (i.e. have a non-void return type), can only define one variable at a time. Therefore, there is a one-to-one mapping between LLVM IR variables and IR instructions that can define variables. For example, below is an add IR instruction: 
%result = add i32 4, %var
%result is the variable defined by this add instruction. No other instructions can redefine %result. This means that we can use the index of this add instruction to the variable %result. At each program point we are interested for the set of live variables. So the domain D for this analysis is Powerset(S) where S is a set of the indices of all the instructions in the function. The bottom is the empty set. The top is S. ⊑ is ⊆ ("is subset of").

Flow Functions

You are asked to implement flow functions that process IR instructions. The flow functions are specified below. You need to implement them in flowfunction in your subclass of DataFlowAnalysis. There are three categories of IR instructions:

First Category: IR instructions that return a value (define a variable)

where operands is the set of variables used (and therefore needed to be live) in the body of the instruction, and index is the index of the IR instruction, which corresponds to the variable <result> being defined. For example, in the instruction %result = add i32 4, %var, operands would be the singleton set { I%var }, where I%var is the index of the instruction that defines %var.

Second Category: IR instructions that do not return a value

Third Category: phi instructions

We will handle the phi instructions in a slightly specialized way to boost the precision of our analysis.

But first lets take a look at the problem that we would be facing, if we followed a naive approach. Suppose we compute a single out set, common to all outgoing edges. Following the intuition of the previous cases, this set will contain all values from <v_11> to <v_xn> that correspond to variables. This set is unnecessarily large: it includes variables that might never meet their corresponding definition following the CFG all the way to the beginning of the function. For example, the instruction corresponding to <v_11> will not be found in any basic block other than the one under label_11.

The root of the problem is that the above approach ignores an important piece of information that the phi instruction provides, namely the label of the basic block that each value originates from. The pair [<v_11>, label_11], for example, guarantees that <v_11> comes from the block labeled with label_11. Therefore, it is pointless to propagate the fact for <v_11> to any other basic block, and hence safe to avoid doing so. This intuition leads to the following flow function:

Here we include all incoming facts like before and exclude variables defined at each phi instruction. In addition, each outgoing set out[k] contains those phi variables v_ij that are defined in its matching basic block (labeled with label_k). The function ValueToInstr is merely used to extract the defining instruction from each phi value.

For the liveness analysis, you only need to consider the following IR instructions:

  1. All the instructions under binary operations;
  2. All the instructions under binary bitwise operations;
  3. br;
  4. switch;
  5. alloca;
  6. load;
  7. store;
  8. getelementptr;
  9. icmp;
  10. fcmp;
  11. phi;
  12. select.
Every instruction above falls into one of the three categories. With the exception of Phi instructions discussed above, if an instruction has multiple outgoing edges, all edges have the same information. Any other IR instructions that are not mentioned above should be treated as IR instructions that do not return a value (the second category above).

Directions

To implement the liveness analysis, you need to

  1. implement the initializeBackwardMap method in 231DFA.h that creates the BDFA CFG;
  2. create a class LivenessInfo in /LLVM_ROOT/llvm/lib/Transforms/CSE231_Project/DFA/LivenessAnalysis.cpp: the class represents the information at each program point for your liveness analysis. It should be a subclass of class Info in 231DFA.h;
  3. create a class LivenessAnalysis in LivenessAnalysis.cpp: this class performs the liveness analysis. It should be a subclass of DataFlowAnalysis. Function flowfunction needs to be implemented in this subclass according to the specifications above;
  4. write a function pass called LivenessAnalysisPass in LivenessAnalysis.cpp: This pass should be registered by the name cse231-liveness. After processing a function, this pass should print out the liveness information at each program point to stderr. The output should be in the following form: 
    Edge[space][src]->Edge[space][dst]:[def 1]|[def 2]| ... [def K]|\n
    where [src] is the index of the instruction that is the start of the edge, [dst] is the index of the instruction that is the end of the edge, [def 1], [def 2] ... [def K] are indices of instructions (definitions) that reach at this program point. The order of the indices does not matter;
  5. You may assume that only C functions will be used to test your implementation;
  6. You may assume that the testing functions do not make any functions calls. However, LLVM does insert calls to intrinsics for analysis and optimization purposes. You should just treat them as second category instructions in your flow function, as call is not listed explicitly above.

May-point-to Analysis

In part 3, you will also need to implement a may-point-to analysis based on the framework you implemented.

Lattice

For this analysis, only memory objects allocated locally by LLVM IR instruction alloca can be pointees. A pointer can be either an LLVM IR variable of some pointer type (IR pointer), or a memory object (memory pointer). The analysis considers a pointer points to a memory object as long as the pointer points to any part of the object. Also, a memory object may contain multiple pointers (For example, a C struct that constains int * p1 and char * p2). The analysis considers such a memory object as one memory pointer and it may point to the union of the the memory objects that the pointers inside of it may point to. DFA identifiers are used to reference IR pointers and memory objects: The DFA identifier of a IR pointer is Ri where i is the index of the defining IR instruction of this IR pointer (IR variable). The DFA identifier of a memory object is Mi where i is the index of the IR instruction that allocates this memory object. For example, suppose that the following IR instruction's index is 10 

%ptr = alloca i32, i32 4
then the DFA identifier of the IR pointer, %ptr, created by this instruction is R10, and the DFA identifier of the memory object allocated by this instruction is M10.

Let Pointers be the set of the DFA identifiers of the pointers in the function (including IR pointers and memory pointers) and MemoryObjects the set of the DFA identifiers of the memory objects allocated in the function. The domain D for this analysis is Powerset(S), where S={p → o | p ∊ Pointers && o ∊ MemoryObjects}. The bottom is the empty set. The top is S. ⊑ is ⊆ ("is subset of").

Flow Functions

Like the reaching definition analysis from part 2, this analysis works at the LLVM IR level, so operations that the flow functions process are IR instructions. Again, each instruction may have multiple incoming edges, so the first step is to merge all incoming edges with the join operation. For simplicity, the flow functions below assume that the incoming edges have been merged. Also, many LLVM IR instructions have a variation that takes vector type parameter. That variation should be ignored in this analysis. The flow functions are specified below. Assume that the index of the IR instruction in question is i.

  1. alloca

  2. bitcast .. to

    3. where Rv is the DFA identifier of <value>.
  3. getelementptr

    4. where Rv is the DFA identifier of <ptrval>.
  4. load

    5. where Rp is the DFA identifier of <pointer>.
  5. store

    6. where Rv and Rp are the DFA identifiers of <value> and <pointer>, respectively.
  6. select

    7. where R1 and R2 are the DFA identifiers of <val1> and <val2>, respectively.
  7. phi

    8. where R0 through Rk are the DFA identifiers of <val0> through <valk>, respectively. This is the flow function for one phi instruction. You need to make sure that all the phi instructions at the beginning of a basic block are processed properly.
  8. Any other instructions

Directions

To implement the may-point-to analysis, you need to create

  1. class MayPointToInfo in /LLVM_ROOT/llvm/lib/Transforms/CSE231_Project/DFA/MayPointToAnalysis.cpp: the class represents the information at each program point for your may-point-to analysis. It should be a subclass of class Info in 231DFA.h;
  2. class MayPointToAnalysis in MayPointToAnalysis.cpp: this class performs a points-to analysis. It should be a subclass of DataFlowAnalysis. Function flowfunction needs to be implemented in this subclass according to the specifications above;
  3. A function pass called MayPointToAnalysisPass in MayPointToAnalysis.cpp: This pass should be registered by the name cse231-maypointto. After processing a function, this pass should print out the points-to information at each program point to stderr. The output should be in the following form: 
    Edge[space][src]->Edge[space][dst]:[point-to 1]|[point-to 2]| ... [point-to K]|\n
    where [src] is the index of the instruction that is the start of the edge, [dst] is the index of the instruction that is the end of the edge. [point-to i] represents what the ith pointer may point to at this moment, and it should be in the following form: 
    [pointer's DFA ID]->([pointee 1's DFA ID][slash][pointee 2's DFA ID][slash] ... [pointee m's DFA ID][slash])
    The orders of the pointers and pointees do not matter;
  4. You may assume that only C functions will be used to test your implementation.
  5. You may assume that inttoptr never appears in any test cases.
  6. You may assume that the testing functions take no parameters and there are no global/static variables. That is, the initial state of the analysis is always bottom.

Turn-in Instructions

The turnin script for part 3 is here.

Directions

  • Put the script in the same directory as the following files:
    • 231DFA.h
    • LivenessAnalysis.cpp
    • MayPointToAnalysis.cpp
  • Run it in that directory.
  • You may submit your code as many times as you like before the deadline.